Error Code 5400 and its solution
Also known as internal temperature error, Error code 5400 occurs when
the internal temperature is abnormal. In most cases, this error
requires replacement of one of the following: the print head, the logic
board, and the carriage unit.
Error Code 9000 and its solution
Error code 9000, or USB Host VBUS Overcurrent issue, occurs when the USB Host VBUS is overloaded. To fix the problem, you would need to replace the Logic board.
Error Code 6A90 and its solution
This error mostly appears during paper purging or feeding. To resolve the issue, perform the following steps in the same order they appear below.
When this error occurs, the carriage stops moving down or up properly. To fix the error, perform these steps in the same order they appear here.
Given the regularity with which printer errors occur due to driver problems, it is important that we focus on not only resolving these errors when they occur, but also on preventing them from occurring in the first place.
Use a driver update tool and keep all your drivers, including Canon printer drivers, up to date. Updated printer drivers ensure that your printer works well and error-free.
Also known as internal temperature error, Error code 5400 occurs when
the internal temperature is abnormal. In most cases, this error
requires replacement of one of the following: the print head, the logic
board, and the carriage unit.Error Code 9000 and its solution
Error code 9000, or USB Host VBUS Overcurrent issue, occurs when the USB Host VBUS is overloaded. To fix the problem, you would need to replace the Logic board.
Error Code 6A90 and its solution
This error mostly appears during paper purging or feeding. To resolve the issue, perform the following steps in the same order they appear below.
- Check the purge drive system unit for paper debris or foreign material. If you found any, remove it immediately.
- Check the ASF unit for traces of stuck paper or foreign material. Remove any material that you found.
- If these two solutions fail to fix the error, you need to replace either the Logic board or the Purge drive system unit.
When this error occurs, the carriage stops moving down or up properly. To fix the error, perform these steps in the same order they appear here.
- Check if there is some paper debris or foreign material around the carriage that is obstructing its movement
- If the error persists, you may need to replace the Carriage unit or the Switch system unit
Given the regularity with which printer errors occur due to driver problems, it is important that we focus on not only resolving these errors when they occur, but also on preventing them from occurring in the first place.
Use a driver update tool and keep all your drivers, including Canon printer drivers, up to date. Updated printer drivers ensure that your printer works well and error-free.
No comments:
Post a Comment